-
Characteristics
Main range of product Harmony XB5product or component type Head for pilot lightproduct compatibility BA 9sdevice short name ZB5bezel material Plasticmounting diameter 22 mmhead type Standardsale per indivisible quantity 1shape of signaling unit head Roundcap/operator or lens colour Redoperator additional information With plain lensComplementary CAD overall width 29 mmCAD overall height 29 mmCAD overall depth 31 mmproduct weight 0.018 kgstation name XALD 1...5 cut-outsXALK 2...5 cut-outselectrical composition code P3 in front mounting with BA 9sP4 in front mounting with BA 9s and transformerPF2 in front mounting with BA 9sEnvironment protective treatment THambient air temperature for storage -40...70 °Cambient air temperature for operation -40...70 °Covervoltage category Class II IEC 60536IP degree of protection IP69 conforming to IEC 60529IP69K conforming to ISO 20653IP66 conforming to IEC 60529IP67 conforming to IEC 60529NEMA degree of protection NEMA 13NEMA 4Xresistance to high pressure washer 7000000 Pa at 55 °C,distance: 0.1 mIK degree of protection IK05 conforming to IEC 50102standards EN/IEC 60947-1EN/IEC 60947-5-1EN/IEC 60947-5-4EN/IEC 60947-5-5JIS C 4520UL 508CSA C22.2 No 14vibration resistance 5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6shock resistance 30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-2750 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27Contractual warranty Warranty period 18 months 18 months -
Documents & Downloads
Language- English
CatalogueDateSizeAdd to My DocumentsCADDateSizeAdd to My DocumentsHead\Round head pilot light\For body with lamp, neon or integrated LED - ZB5AV0..Date 26/09/11Size 750 BDate 26/09/11Size 24.3 KBDate 26/09/11Size 12.8 KBDate 26/09/11Size 1.1 KBHead\Round head pilot light\For body with lamp, neon or integrated LED - ZB5AV0..Date 26/08/16Size 4.9 KBDate 26/08/16Size 49.7 KBDate 26/08/16Size 80.5 KBDate 26/08/16Size 9.9 KBCertificateDateSizeAdd to My DocumentsDate 29/10/18Size 155.7 KBInstruction sheetDateSizeAdd to My DocumentsDate 12/10/18Size 214.9 KBDate 15/06/16Size 1.7 MBProduct environmentalDateSizeAdd to My DocumentsDate 13/12/17Size 516.3 KB -
Technical FAQs
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later. -
Dimensions Drawings
Dimensions
-
Mounting and Clearance
Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)Connections
a in mm
a in in.
b in mm
b in in.
By screw clamp terminals or plug-in connector
40
1.57
30
1.18
By Faston connectors
45
1.77
32
1.26
On printed circuit board
30
1.18
30
1.18
Detail of Lug Recess
(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)Pushbuttons, Switches and Pilot Lights for Printed Circuit Board ConnectionPanel Cut-outs (Viewed from Installer’s Side)
A:30 mm min. / 1.18 in. min.B:40 mm min. / 1.57 in. min.Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)Dimensions in mm
A:30 mm min.B:40 mm min.Dimensions in in.
A:1.18 in. min.B:1.57 in. min.General Tolerances of the Panel and Printed Circuit BoardThe cumulative tolerance must not exceed 0.3 mm / 0.012 in.: T1 + T2 = 0.3 mm max.
Installation PrecautionsMinimum thickness of circuit board: 1.6 mm / 0.06 in.
Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
Orientation of body/fixing collar ZB5AZ009: ± 2°30’ (excluding cut-outs marked a and b).
Tightening torque of screws ZBZ006: 0.6 N.m (5.3 lbf.in) max.
Allow for one ZB5AZ079 fixing collar/pillar and its fixing screws:
every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
with each selector switch head (ZB5AD•, ZB5AJ•, ZB5AG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.
(1)Head ZB5AD•(2)Panel(2)Nut(4)Printed circuit boardMounting of Adapter (Socket) ZBZ01•1 2 elongated holes for ZBZ006 screw access
2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ01•
3 8 × Ø 1.2 mm / 0.05 in. holes
4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ01•
Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ01•.
-
Technical Description
Electrical Composition Corresponding to Codes P1, P3, PF1, PR1 and PF2Light block
Electrical Composition Corresponding to Code P4
LegendSingle contact
Double contact
Light block
Possible location
