-
Characteristics
Main range of product Harmony XB5product or component type Head for non-illuminated push-buttondevice short name ZB5bezel material Plasticmounting diameter 22 mmhead type Standardsale per indivisible quantity 1shape of signaling unit head Roundtype of operator Latchingreset Push-pulloperator profile Yellow mushroom Ø 30 mm unmarkedComplementary CAD overall width 30 mmCAD overall height 30 mmCAD overall depth 56 mmmechanical durability 300000 cyclesstation name XALD 1...5 cut-outsXALK 2...5 cut-outselectrical composition code C11 for <= 3 contacts using single blocks in front mountingC15 for 1 contacts using single blocks in front mountingSF1 for <= 3 contacts using single blocks in front mountingSR1 for <= 3 contacts using single blocks in rear mountingC7 for <= 4 contacts using single blocks in front mountingC8 for <= 4 contacts using single and double blocks in front mountingC10 for <= 4 contacts using single and double blocks in front mountingEnvironment protective treatment THambient air temperature for storage -40...70 °Cambient air temperature for operation -40...70 °Covervoltage category Class II conforming to IEC 60536IP degree of protection IP69IP67IP66 conforming to IEC 60529IP69KNEMA degree of protection NEMA 13NEMA 4Xresistance to high pressure washer 7000000 Pa at 55 °C,distance: 0.1 mIK degree of protection IK03 conforming to IEC 50102standards EN/IEC 60947-1EN/IEC 60947-5-1EN/IEC 60947-5-4JIS C 4520UL 508CSA C22.2 No 14product certifications BVCSADNVGLLROS (Lloyds register of shipping)RINAUL listedshock resistance 30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-2750 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27vibration resistance 5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6Offer Sustainability Sustainable offer status Green Premium productRoHS (date code: YYWW) REACh Product end of life instructions Need no specific recycling operationsContractual warranty Warranty period 18 months -
Documents & Downloads
Language- English
Instruction sheetDateSizeAdd to My DocumentsDate 12/10/18Size 214.9 KBDate 15/06/16Size 1.7 MBProduct environmentalDateSizeAdd to My DocumentsREACh DeclarationDateSizeAdd to My Documents -
Technical FAQs
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later. -
Dimensions Drawings
Dimensions
-
Mounting and Clearance
Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)Connections
a in mm
a in in.
b in mm
b in in.
By screw clamp terminals or plug-in connector
40
1.57
30
1.18
By Faston connectors
45
1.77
32
1.26
On printed circuit board
30
1.18
30
1.18
Detail of Lug Recess
(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)Pushbuttons, Switches and Pilot Lights for Printed Circuit Board ConnectionPanel Cut-outs (Viewed from Installer’s Side)
A:30 mm min. / 1.18 in. min.B:40 mm min. / 1.57 in. min.Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)Dimensions in mm
A:30 mm min.B:40 mm min.Dimensions in in.
A:1.18 in. min.B:1.57 in. min.General Tolerances of the Panel and Printed Circuit BoardThe cumulative tolerance must not exceed 0.3 mm / 0.012 in.: T1 + T2 = 0.3 mm max.
Installation PrecautionsMinimum thickness of circuit board: 1.6 mm / 0.06 in.
Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
Orientation of body/fixing collar ZB5AZ009: ± 2°30’ (excluding cut-outs marked a and b).
Tightening torque of screws ZBZ006: 0.6 N.m (5.3 lbf.in) max.
Allow for one ZB5AZ079 fixing collar/pillar and its fixing screws:
every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
with each selector switch head (ZB5AD•, ZB5AJ•, ZB5AG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.
(1)Head ZB5AD•(2)Panel(2)Nut(4)Printed circuit boardMounting of Adapter (Socket) ZBZ01•1 2 elongated holes for ZBZ006 screw access
2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ01•
3 8 × Ø 1.2 mm / 0.05 in. holes
4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ01•
Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ01•.
-
Technical Description
Electrical Composition Corresponding to Code C7
Electrical Compositions Corresponding to Code C8
Electrical Compositions Corresponding to Code C10
Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1
Electrical Composition Corresponding to Code C151 N/O
1 N/C
1 N/O + N/C or 1 N/O + N/O or 1 N/C + N/C
LegendSingle contact
Double contact
Light block
Possible location
