Main rangeTeSys product nameTeSys D product or component typeContactor device short nameLC1D contactor applicationMotor controlResistive load utilisation categoryAC-1AC-3AC-4 poles description3P pole contact composition3 NO [Ue] rated operational voltage<= 300 V DC for power circuit<= 690 V AC 25...400 Hz for power circuit [Ie] rated operational current80 A (<= 60 °C) at <= 440 V AC AC-1 for power circuit65 A (<= 60 °C) at <= 440 V AC AC-3 for power circuit motor power kW11 kW at 400 V AC 50/60 Hz AC-430 kW at 380...400 V AC 50/60 Hz AC-337 kW at 500 V AC 50/60 Hz AC-337 kW at 660...690 V AC 50/60 Hz AC-318.5 kW at 220...230 V AC 50/60 Hz AC-3 motor power hp40 hp at 460/480 V AC 50/60 Hz for 3 phases motors5 hp at 115 V AC 50/60 Hz for 1 phase motors10 hp at 230/240 V AC 50/60 Hz for 1 phase motors20 hp at 200/208 V AC 50/60 Hz for 3 phases motors20 hp at 230/240 V AC 50/60 Hz for 3 phases motors50 hp at 575/600 V AC 50/60 Hz for 3 phases motors control circuit typeDC standard [Uc] control circuit voltage110 V DC auxiliary contact composition1 NO + 1 NC [Uimp] rated impulse withstand voltageConforming to IEC 60947 overvoltage categoryIII [Ith] conventional free air thermal current80 A at <= 60 °C for power circuit10 A at <= 60 °C for signalling circuit Irms rated making capacity1000 A at 440 V for power circuit conforming to IEC 60947140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-1 rated breaking capacity1000 A at 440 V for power circuit conforming to IEC 60947 [Icw] rated short-time withstand current100 A 1 s signalling circuit120 A 500 ms signalling circuit140 A 100 ms signalling circuit520 A <= 40 °C 10 s power circuit900 A <= 40 °C 1 s power circuit110 A <= 40 °C 10 min power circuit260 A <= 40 °C 1 min power circuit associated fuse rating125 A gG at <= 690 V coordination type 1 for power circuit125 A gG at <= 690 V coordination type 2 for power circuit10 A gG for signalling circuit conforming to IEC 60947-5-1 average impedance1.5 mOhm at 50 Hz - Ith 80 A for power circuit [Ui] rated insulation voltage600 V for power circuit certifications CSA600 V for power circuit certifications UL690 V for power circuit conforming to IEC 60947-4-1690 V for signalling circuit conforming to IEC 60947-1600 V for signalling circuit certifications CSA600 V for signalling circuit certifications UL electrical durability1.45 Mcycles 65 A AC-3 at Ue <= 440 V1.4 Mcycles 80 A AC-1 at Ue <= 440 V power dissipation per pole6.3 W AC-39.6 W AC-1 protective coverWith mounting supportPlateRail standardsCSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508 product certificationsCCCCSAGOSTUL connections - terminalsControl circuit : spring terminals 1 cable(s) 2.5 mm² - cable stiffness: flexible - without cable endControl circuit : spring terminals 2 cable(s) 2.5 mm² - cable stiffness: flexible - without cable endPower circuit : spring clamp terminal 1 cable(s) 1...35 mm² - cable stiffness: flexible - with cable endPower circuit : spring clamp terminal 1 cable(s) 1...35 mm² - cable stiffness: solid - without cable endPower circuit : spring clamp terminal 2 cable(s) 1...25 mm² - cable stiffness: solid - without cable endPower circuit : spring clamp terminal 1 cable(s) 1...35 mm² - cable stiffness: flexible - without cable endPower circuit : spring clamp terminal 2 cable(s) 1...25 mm² - cable stiffness: flexible - without cable endPower circuit : spring clamp terminal 2 cable(s) 1...25 mm² - cable stiffness: flexible - with cable end tightening torquePower circuit : 8 N.m - on screw clamp terminals - cable 25...35 mm² hexagonal 4 mmPower circuit : 5 N.m - on screw clamp terminals - cable 2.5...25 mm² hexagonal 4 mm operating time16...24 ms opening42.5...57.5 ms closing safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 mechanical durability10 Mcycles operating rate3600 cyc/h at <= 60 °C Complementary coil technologyBuilt-in bidirectional peak limiting diode suppressor control circuit voltage limits0.1...0.3 Uc drop-out at 60 °C, DC0.75...1.25 Uc operational at 60 °C, DC time constant34 ms inrush power in W19 W at 20 °C hold-in power consumption in W7.4 W at 20 °C auxiliary contacts typeType mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1Type mirror contact (1 NC) conforming to IEC 60947-4-1 signalling circuit frequency25...400 Hz minimum switching current5 mA for signalling circuit minimum switching voltage17 V for signalling circuit non-overlap time1.5 ms on de-energisation (between NC and NO contact)1.5 ms on energisation (between NC and NO contact) insulation resistance> 10 MOhm for signalling circuit Environment IP degree of protectionIP20 front face conforming to IEC 60529 protective treatmentTH conforming to IEC 60068-2-30 pollution degree3 ambient air temperature for operation-5...60 °C ambient air temperature for storage-60...80 °C permissible ambient air temperature around the device-40...70 °C at Uc operating altitude3000 m without derating in temperature fire resistance850 °C conforming to IEC 60695-2-1 flame retardanceV1 conforming to UL 94 mechanical robustnessVibrations contactor open 2 Gn, 5...300 HzVibrations contactor closed 4 Gn, 5...300 HzShocks contactor open 10 Gn for 11 msShocks contactor closed 15 Gn for 11 ms height122 mm width55 mm depth120 mm product weight0.935 kg Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructions Contractual warranty Warranty period18 months
Documents & DownloadsLanguage
CADSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.