FAQs

Ask a Question

Filter results

Clear
Where can I find information on the ATS48 analog output?
Issue: Information on the ATS48 analog output? Product Line: ATS48 Environment: All models and serial numbers Cause: None Resolution: The analog output...
Does the MICROLOGIC 6.0A / 6.0P / 6.0H trip unit have a ground fault test button and where is it?
Issue: Does the MICROLOGIC 6.0A / 6.0P / 6.0H trip unit have a ground fault test button and where is it? Product Line: Circuit Breakers Environment:...
How can I program an ATV312 for PI control?
Issue: How can I program ATV312 for PI control? Product Line: ATV312 Altivar 312 Environment: All models Cause: Activating PID control Resolution:...
Video: How can the type of stop be changed for the ATV312 (or ATV31) drive?
Issue: Need to change the Stop Type on the ATV312 drive. Product line: ATV312, Altivar 312, ATV31 Resolution: The default setting for Type of Stop...
What is a good source of information for the ATS48 soft start?
Issue: Information is needed to facilitate installation and programming. Product line: Altistart ATS48 Environment: All models, all serial numbers...
How is a run permissive function added to an ATV61/71?
Issue: How is a run permissive function added to an ATV61/71? Product Line: Altivar 61 71 ATV61 ATV71 Environment: All models Cause: The VFD needs...
How to setup a Fault Status on the Altivar Process Drive?
Issue: How to setup a Fault Relay on the Altivar Process Drive? Product Line: Altivar Process Drive (ATV630, ATV930, ATV650, ATV950, ATV660, ATV960,...
What is the reference of Type A or Type B thermostat in Prisma Plus switchboard?
Type C thermostat is available in Prisma Plus, the part reference of which is 08998. The Type C thermostat Reference 08998 can be used as Type A or...
Can an impulse-type power supply be used for electrical opening and closing order of Compact NS MCCB?
Yes, the impulse-type power supply (time duration > 20 ms and Voltage level above 0.7Un) can be used for electrical opening and closing of Compact...
What is the overvoltage fault threshold of Altivar 31.
The over voltage fault threshold of Altivar 31 is as attached.
Results 1 - 10 of 100