Technical FAQs

Ask a Question

Can you provide examples on how to programme the CCT15854 timer?

The following general programming information is from our L3 technical support .
*************************************************************
The CCT15854 is not using start and end time.

You create a program with ON switching time and then another program with OFF switching time.
So in fact you have to create two programs.
To program the mentioned times you have to do the following steps:

For ON switching at 5 AM:
Select Menu/program/new/select ON/configure hour and minute (5:00)/select weekday:

 Monday/select COPY (4 times) for the following days
 (Tuesday until Friday)/press "next" 2 times to leave out Saturday and Sunday/save the program

For OFF switching at 8 PM you have to repeat these steps. It is like creating a new program:
Select Menu/program/new/select OFF/configure hour and minute (20:00)/select weekday:

 Monday/select COPY (4 times) for the following days
 (Tuesday until Friday)/press "next" 2 times to leave out Saturday and Sunday/save the program
*************************************************************
By the way, for further general information, but not specific to your recent programming requirements;
here are links to 2 of Schneider Electric's YouTube training files for the CCT15854 timer.
These links successfully opened in September 2016.

However, these links are subject to being changed at anytime without notification.

(1) Programming schedule
https://www.youtube.com/watch?v=qanrT1VG-X4&list=PLMRr8wX6cNHPCuIIWeUYzPSMAavasUZow&index=1

(2) Override
https://www.youtube.com/watch?v=ElY1zuPrWQQ&list=PLMRr8wX6cNHPCuIIWeUYzPSMAavasUZow
Was this helpful?
What can we do to improve the information ?